dds2tar
Section: Misc. Reference Manual Pages (1L)
Updated: 2.3
Index
Return to Main Contents
NAME
dds2tar - tool for fast tape access
SYNOPSIS
dds2tar
[
-f
device
] [
-t
indexfile
] [options]
string ...
DESCRIPTION
dds2tar
uses an index to find the files with record seek (a fast
operation of DAT devices).
Since the file structure of the tape archives is
used to extract the files, the archive has to be created by
tar,
compressed only by (the transparent
signal processor of) the device.
So you can step through the archive
very quickly and extract files.
The index may be created using
dds2index
or
tar-vRt
and is normally stored as a file on your hard disk.
A tar archive is a sequence of blocks (e.g. 10240 bytes by default),
each containing the same number (20 by default) of records, 512 byte each.
dds2tar
reads the tape and writes the tar records of the
specified files (that means the header record and the data records of each
selected file)
to stdout.
You may pipe the
dds2tar
output to the stdin of
tar -xvvf -
to restore the files to your disk.
(See
EXAMPLES
below.)
Before a file is extracted,
the records of parent directories of the file are also written to stdout.
The index of the archive should contain enough information
to compute the number of the block containing the header of each selected
file.
dds2index
will give such a table,
tar -Rvt
e.g. will not (only record numbers are listed).
A patch for
GNU tar-1.11.2
is available, adding the option
--record-file.
Alternatively there are some tricks to get the missing
information.
The strings are regular expressions to select the files.
The matching algorithm is the one from GNU tar. If the option
-l
is given, the matched file names are printed to stdout (You may not pipe
this list of pathnames to tar!).
The default device is
/dev/tape,
which may be overridden with the environment variable
TAPE,
which in turn may be overridden with the
-f device
option. The device must be a SCSI tape device.
OPTIONS
-f devicefile
Device of the tape archive. Must be a SCSI tape device.
- -t indexfile
-
Specifies the index file (default is stdin).
- -s #
-
Set the number of the first tape block of the archive. This option is
useful only if the index file contains the verbose output of
tar -Rvt.
Any information about the first block
inside the index file will be overridden by this option.
If no information is available, the archive has to be the first file of
the tape. If you have positioned your tape at the first block of the archive,
you can use
-
dds2tar `mt-dds` -t index ... | tar -f - ...
-
to complete the information of the output of
tar -Rvt
stored in the
index file.
- -b #
-
Set the number of the blocksize of the archive (tar -b #). This option is
useful only if the index file contains the verbose output of tar (or if
you have problems with the size of the internal buffer of dds2tar).
Any information about the blocksize
inside the index file will be overridden by this option.
If no information is available, the default blocksize of tar is used.
- -z
-
The index file should be read and stored in compressed mode.
OPTIONS you didn't really need
- --z, --no-compress
-
Don't filter the archive file through gzip.
- -q, --quick
-
Don't extract the parent directories of the selected objects from tape.
--body
Write only the first selected file to stdout. This is useful if you want to
read a file or extract an archive which is part of the current archive.
- -v,--verbose
-
verbose mode.
- --hash-mode
-
Print a hash sign for each MB.
- -V,--version
-
Print only the Version Number to stderr.
- -l
-
Don't access the tape but print the file names to stdout.
You may not pipe this list of pathnames into tar.
- --extract
-
The stdout is closed and opened by a pipe to the command
tar -fxb - 1.
You may find this option convenient, I like to pipe the output to tar
by hand.
EXAMPLES
Example of
getting the index
from the default tape /dev/tape
and storing it in file archive.idx:
-
dds2index -t archive.idx
Alternatively you can use a patched version of tar to create an index file.
With the patch you can direct the errors and warning to stdout and the
index information including information about
the blocksize and the number of the
first block to a file:
-
tar -t --record-file archive.idx
If the archive is the first file of the tape and the blocksize is the default
of 20, you can use the verbose output of tar (-Rv) as an index file.
-
tar -t -v -R | tee archive.idx
If the archive is not the first file of the tape, you can store all the
necessary information inside the index file with the use of
mt-dds
and
tar
:
-
mt asf ...
mt-dds tell > archive.idx
tar -tvR >>archive.idx
Example of
using dds2tar
to extract the gnu library
(all files containing the string "glibc" in filename)
from the default tape /dev/tape,
using the previously stored index file archive.idx:
-
dds2tar -t archive.idx '*glibc*' | tar xvvf -
To see in advance what would happen in the previous command
without actually writing anything to your disk,
you may use:
-
dds2tar -t archive.idx '*glibc*' | tar tvvf -
Example of checking the matches. You may try:
-
dds2tar -t archive.idx -l '*glibc*'
BACKGROUND INFORMATION
tapes
A tape device handles all I/O (read, write, seek) in units of
tape records.
The bigger a tape record, the more effective usually is
the access (and the less gaps are on QIC-tapes).
However, normally a program will only read or write complete tape records.
Normal tape drives allow to seek only relative to the current
position. However, some newer SCSI-2 tapes, i.e. DAT,
conforming to the DDS standard,
keep track of the absolute position on the tape by inserting the
tape record number inside each track.
This number can be read while
the fast seek is performed.
The
tar(1)
program uses a slightly different terminology.
It calls
tape blocks
what normally is called
tape records.
In the following sections we use the tar terminology
to avoid confusion.
tar
The unit inside a
tar
archive is a
tar record
with a fixed length of 512 bytes. Every file, directory or soft link
will occupy at least one tar record of information about
pathname, permission information and so on called header record.
The data of each file is stored in additional tar records directly after
the header record of that file.
tar reports the
tar record number
of every header record in the archive with its -R option.
tar counts the records continuously,
starting with
0
(if invoked as tar -tR) or with
1
(if invoked as tar -cR).
tar handles multiple records as a
tar block,
mainly to make the access of tapes (or disks) more efficient (and save
tape space of QIC-tapes).
tar only writes and reads full blocks to or from an archive.
The -b option of tar controls, how many records are in
one block. The default number of records per block is
20.
This number is usually called the
tar block size.
However, this term is a little bit confusing, since
it does not mean the number of bytes in a block.
Thus a perhaps better name would be the
tar blocking factor.
tar on tapes
tar writes or reads its archive to or from tape in units of tar
blocks.
As stated above, only a complete tape block may be transferred to/from
tape. To extract a specific tar block from tape, one has to
read an entire tape block into a buffer and extract
the specified tar record from the buffer manually.
If you would like to read a tar record with a given number,
you have to know the number of the first tape block of the archive
and the tar block size to compute the number of the tape block witch
contains the tar record to read.
If the tar archive is the first file on the tape, the
tape block number
is the equal to the
tar block number.
Example:
A file with the tar record number 1234 (records start with 0)
may be found in a tape tar archive, written with a
blocking factor of 20.
It may be found in the tar block with the number
-
blk = (int) 1234/20 = (int) 61.7 = 61
which is also the tape block number.
The requested file is within this tar block at the record offset
-
rec = 1234-(61*20) = 14
in 512 byte units.
If a current archive is not the first archive on the tape, then
the number of
tape blocks
of all previous archives has to be
added to the block number computed above,
to get the
current tape block number.
The number of previous tape records
should be obtained from DDS devices
when the tape is positioned
at the beginning of the current archive (use
mt-dds
without arguments for example).
Example:
Assuming the archive in the above example to be the second file
on a tape, and the archive starts at tape block 20222.
Then we will find our file with tar record number 1234
in the tape block
-
tblk = 20222 + (int) 1234/20 = 20283
on the tape.
The record offset inside the tape block will be the same as above.
WARNING
This program can only read records (tar is calling them tape blocks)
up to 32 kbytes due to the limitations of the Linux device driver.
The extracted archive is written to stdout with a
block size of 512 bytes.
ENVIRONMENT
The environment variable
TAPE
overrides the default tape device /dev/tape.
The variable
DDS2TAR cat be used to give some options, e.g.
--compress, -z, -s # , -b #.
SEE ALSO
dds2index(1), mt(1), mt-dds(1), tar(1)
HISTORY
This program was created to use the fast seek operation of my DAT
streamer. The tapes are called dds (digital data storage).
Since the program will write a tar archive to stdout,
I called this program
dds2tar.
If I created the index file, I'm now
able to restore a file of 1MB within one minute even if the tape
contains more than 2GB of data.
Thanks to Andreas (Andreas_Bagge@h2.maus.de), who has written a nice
manual page for the overloaded version 1.1.3 of the program dds2tar
(I added too much features ... )
His manual page for dds2tar-1.1.3 gave me the idea how to split the
program dds2tar into the peaces dds2tar, dds2index and mt-dds.
Additionally his manual page was the starting point for this page.
Since the version 2.2 has a very robust algorithm to read the index file
and the ability of pattern matching, a lot of options where obsolete
and has been deleted. I tried to make dds2tar as simple I can.
AUTHOR
J"org Weule (weule@cs.uni-duesseldorf.de), Phone +49 211 751409.
This software is available at
ftp.uni-duesseldorf.de:/pub/unix/apollo and
sunsite.unc.edu:/pub/Linux/system/Backup
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- OPTIONS
-
- OPTIONS you didn't really need
-
- EXAMPLES
-
- BACKGROUND INFORMATION
-
- tapes
-
- tar
-
- tar on tapes
-
- WARNING
-
- ENVIRONMENT
-
- SEE ALSO
-
- HISTORY
-
- AUTHOR
-
This document was created by
man2html,
using the manual pages.
Time: 22:24:10 GMT, January 16, 2023